Type 64 submachine gun (PR China)

Type 64 submachine gun (PR China)


Type 64 silenced submachine gun, less magazine


Type 64 silenced submachine gun with magazine in place, left size. Note that safety / fire selector lever is duplicated on either side of weapon

Caliber: 7.62x25 Type 64
Weight: 3.4 kg empty
Length (stock closed/open): 635 / 843 mm
Barrel length: 244 mm
Rate of fire: 1300 rounds per minute
Magazine capacity: 30 rounds
Effective range: 150-200 meters

Type 64 submachine gun is one of the first domestically designed Chinese submachine guns. It was designed as a special purpose weapon for clandestine operations, and therefore is fitted with integral silencer (sound moderator) of significant size. Standard ammunition for Type 64 SMG is 7.62mm type 64 cartridge, which is based on 7.62x25mm Type 51 (same as Soviet 7.62x25mm TT) but is loaded with heavy, pointed bullet with subsonic velocity. Standard 7.62x25 TT ammunition also can be fired from Type 64 SMG but it will cause excessive wear to gun and its silencer. One interesting property of the Type 64 submachine gun is its extremely high cyclic rate of fire, about two times higher than the commonly accepted norm (about 400 to 600 rounds per minute). Because of such high rate of fire, this weapon was probably hard to control in full automatic mode.

Type 64 submachine gun is simple blowback weapon that fires from open bolt. Receiver is machined from steel block, with stamped top cover; silencer is also made of steel. Front part of the barrel is ported to allow some gases to escape from barrel into the silencer. Fire mode selector / safety lever is patterned after Type 56 (AK) assault rifle and allows for single shots and full automatic fire. Curved box magazine holds 30 rounds of ammunition. Shoulder stock folds down and forward when not needed. Sights are of traditional, open type; rear sight is a two-position flip-up part, with settings for 100 and 200 meters range.

FAMAE S.A.F. (Chile)

FAMAE S.A.F. (Chile)


FAMAE S.A.F.


FAMAE S.A.F. with integral silencer


FAMAE S.A.F. field stripped into main parts

Caliber: 9x19mm Luger/Para
Weight: 2.7 - 3 kg without magazine (depending on variant)
Lenght (stock closed/open): 410 / 640 mm
Barrel lenght: 198 mm
Rate of fire: 1120 - 1280 rounds per minute
Magazine capacity: 20 or 30 rounds
Effective range: 100-150 meters

The S.A.F. SMG was developed and is manufactured by Chilean company FAMAE. The S.A.F. design is based on SIG 540 assault rifle, designed in Swiss and manufactured in Chile by FAMAE under license from SIG.

The S.A.F. SMG is in service with Chilean Armed Forces and Police.

Technically, the S.A.F. is a recoil operated select fire gun, firing from closed bolt. The triger/hammer group and floating firing pin design is similar to SIG 540, but the bolt is of new design. The receiver is similar in design to SIG 540, and is of folding type (upper and lower receivers are assembled by two steel pins, much like the M16 receiver does). The S.A.F. has ambidextrous safety/fire selector switch with four settings - safe, single shot, 3 round bursts and full auto. S.A.F. SMGs are manufactured with side-folding or fixed polymer buttstocks. Silenced version, with folding buttstock and integral silencer is available for special forces use. S.A.F. has post front sight, ajustable wor elevation, and aperture rear sight, ajustable for windage. S.A.F. uses 20 or 30 rounds magazines made from transluscent polymer. Magazines had special studs and slots that allowed two or more magazines to be clipped together for quicker magazine change.

Mekanika URU submachine gun (Brazil)


Mekanika URU submachine gun (Brazil)

Caliber 9x19mm Luger / Parabellum
Weight 3.9 kg empty
Length (stock closed/open) 456 / 689 mm
Barrel length 175 mm
Rate of fire 750 rounds per minute
Magazine capacity 30 rounds

 

 

 

 

 

 

The URU submachine gun was designed in Brazil by Olympio Vieira de Mello in 1974-75. The production of the new submachine gun was commenced at the company Mekanika Indústria e Comércio Ltda, Rio de Janeiro, in 1977. Total production of the URU submachine guns for Brazilian military and police between 1977 and 1985 is estimated at about 10 thousands guns. 

The Mekanika URU submachine gun is a simple blowback weapon which fires from open bolt. It is capable of semi- and full-automatic fire, and combination safety / fire mode selector lever is located on the left side of the trigger unit. The receiver and barrel jacket are made from steel tube, the trigger housing and magazine well / forward grip are made from steel stampings. Gun is equipped with side-folding metallic buttstock. Sights are fixed, comprising of rear aperture and front post, factory zeroed for 50 meters range.

(Belgium)FN P90 personal defense weapon / submachine gun

FN P90 personal defense weapon / submachine gun (Belgium)


FN P90 personal defense weapon / submachine gun in basic configuration, left side


FN P90 personal defense weapon / submachine gun in basic configuration, right side


FN P90 TR (triple rail version) personal defense weapon / submachine gun, with installed accessories including optical sight on top rail, flashlight on left rail, and silencer on the barrel


FN PS90 - a civilian semi-automatic only version of P90 with long barrel


Bottom view on the filed FN P90 magazine, showing position of the stored cartridges and cartridge in feed position


FN P90 partially disassembled

Caliber: 5.7x28mm SS190
Weight: 2.54 kg empty; 3 kg loaded with magazine with 50 rounds
Length: 500 mm
Barrel length: 263 mm
Rate of fire: 900 rounds per minute
Magazine capacity: 50 rounds
Effective range: 200 meters

The FN P90 submachine gun (SMG) was developed in the late 1980s as a personal defense weapon for the troops whose primary activities does not include small arms, such as vehicle and tank crew members, artillery crews etc. Standard pistols and submachine guns chambered for pistol rounds were proved ineffective against enemy soldiers, wearing body armor; Therefore FN designers first developed a new round with enhanced penetration, initially known as SS90. To achieve necessary high penetration while keeping recoil impulse low, FN used a small-bore approach, creating a round that looked much like the scaled down 5,56NATO round. It must be noted that similar concepts were tried in other countries, most notably in USA, several decades before FN; for example, US Army tested M1 carbines chambered for .221 Johnson Spitfire round back in late 1950s; later on, Colt produced its .22 SCAMP and 5,6x30 MARS ammunition for special SCAMP machine pistol and MARS "mini assault rifle" (a scaled-down M16 rifle) respectively. It must be noted that 5,6x30 MARS round was in a sense a direct predecessor to 5,7x28 FN SS90 round, although the latter featured slightly lighter and faster bullet. By late 1980s a concept of a small-bore, low-impulse "personal defense weapon" (PDW) with good accuracy and lethality at ranges of up to 200-250 meters was well established, although there were no weapons adopted for service yet. FN decided to follow this concept and to create its own PDW using clean sheet approach. Basic ideas used for this development, designated as "Project 9.0", included the following: minimal size and weight of weapon; large magazine capacity; complete ambidexterity; ease of use and maintenance.
To save on size and weight, FN designers put new weapon into compact and lightweight stock of bullpup layout, made of impact-resistant polymer. The high-capacity magazine also was made from semi-translucent polymer, and holds 50 rounds in two rows. To made loaded weapon as compact as possible, FN designers followed the idea of American designer Hall, and placed the magazine above the barrels, with cartridges stored in horizontal position with bullets pointing to the left. While Hall system employed a rotary feed unit, operated by the bolt, to put new cartridge in line with the barrel, FN designers incorporated a stationary helical ramp into each magazine, which rotates cartridge for 90 degrees prior to placing it into feed lips. Complete ambidexterity was achieved by using ambidextrous controls (including dual charging handles and dual back-up open sights), and bottom ejection. Finally, simplicity of aiming was achieved by use of integral reflex type collimating sight and integral laser aiming module (LAM).
Resulting weapon appeared in around 1990 as FN P90 personal defense weapon, along with improved 5,7x28 SS190 ammunition, which replaced polymer-cored bullets with heavier dual-core (steel / aluminum) bullets with better penetration against body armor. Several other types of ammunition were developed for this weapon, including tracer, subsonic ball and soft-core training ball.
First sales of P90 were made to Saudi Arabia in early 1990s; today it is believed that FN sold more than 20 000 of P90's to a wide variety of law enforcement agencies and military special operation units worldwide, including US Secret Service, Austrian Army rangers, Dutch BBE special operations forces, Belgian Army and others. Most interesting fact about adoption of P90 is that so far it has been adopted for the role, directly opposite to its original niche of "personal defense weapon". In fact, most services and agencies that adopted P90 use it for offensive roles, as a specialist or even a primary weapon for various assault teams, and other "professional small-arms users", as opposed to military personnel which primary functions do not include use of small arms.
In around 1995 FN supplemented the P90 with pistol, firing the same 5,7x28 ammunition, designated as FN Five-seveN. Recently, FN also introduced a civilian version of P90, designated as PS90 carbine. This is a self-loading weapon with longer barrel (408 mm / 16").

FN P90 personal defense weapon is blowback operated, selective-fired weapon which fires from closed bolt. The firing is controlled by a removable trigger unit with conventional hammer. A manual safety is located directly below the trigger. Magazine lies at the top of the weapon, feeding from front-to-back, with spiral ramp built into the "rear" part of the magazine. Spent cartridges are ejected straight down through the chute, which exits just behind the pistol grip. The standard sighting equipment includes a non-magnifying collimating sight with "ring and dot" illuminated aiming reticule. Back-up open sights are provided at either side of the primary collimating sight. The so-called P90 USG version is provided with two additional Picatinny rails at either side of the collimating sight base; FN also offers a version with no standard sighting equipment; user has to make its own choice of day and/or night sights and additional equipment, which can be installed on three Picatinny rails - top, left and right. This version is designated as P90 TR (triple rail). The front part of the forward handgrip on P90 is shaped as hand protector, and it can contain integral laser aiming module, which sends either visible or IR laser beam to mark the intended target. For special missions P90 can be fitted with a special silencer, which is used in conjunction with special subsonic ammunition.

Vigneron M2 submachine gun (Belgium)

Vigneron M2 submachine gun (Belgium)


Vigneron M2 submachine gun, right side


Vigneron M2 submachine gun, left side

Caliber 9x19mm Luger / Parabellum
Weight 3,28 kg empty
Length (stock closed/open) 695 / 872 mm
Barrel length 300 mm
Rate of fire 620 rounds per minute
Magazine capacity 32 rounds
Effective range 100 meters

The Vigneron submachine gun was developed during early fifties by the officer of the Belgian army and produced by Belgian company Precision Liegoise SA. It was adopted by Belgian army in 1953, and saw some combat in then-Belgian Congo. Vigneron submachine gun was quite conventional in design and appearance, and not much more can be told about this weapon.

Vigneron submachine gun is blowback operated, selective fired weapon which fires from open bolt. Fire mode selector / safety switch is located on the left side of the grip, just behind the trigger. It is interesting that in full automatic mode short pull on the trigger will still, produce single shots, and only a long pull will produce full automatic fire. Additional automated safety is built into the backstrap of the pistol grip. Cocking handle is located on the left side of the receiver, and is stationary when gun is fired. Ejection port has a spring-loaded dust cover. Barrel is relatively long and has two ports just behind the front sight base, which serve as a muzzle rise compensator. Sights are fixed, with rear aperture set for 50 meters range. Stock is made from steel wire and is retractable, with several positions so shooter can adjust it to his own preferences. 

Steyr AUG Para 9mm submachine gun (Austria)

Steyr AUG Para 9mm submachine gun (Austria)


Steyr AUG A1 Para 9mm submachine gun, original version


Steyr AUG A3 XS 9mm submachine gun

Data for current production Steyr AUG A3 XS submachine gun
Caliber
9x19mm Luger/Parabellum
Weight 3,0 kg empty
Length 610 mm
Barrel length: 325 mm
Magazine capacity 25 rounds
Rate of fire ~700 rounds/minute

Buy Steyr tactical rifles and accessories at Impact Guns online store

The original Steyr AUG Para 9mm submachine gun is a reversible conversion of the original Steyr AUG assault rifle, intended mostly for short-range police and special operations work. This weapons combines relatively compact dimensions with very good accuracy (compared with other 9mm submachine guns), thanks to a long barrel and closed-bolt firing. If necessary, Steyr AUG 9mm submachine gun also can be fitted with silencer.

Steyr AUG Para 9mm submachine gun utilizes basic components (aluminum receiver and polymer stock of bullpup configuration) from the Steyr AUG assault rifle. The 9mm barrel is installed (original Steyr AUG assault rifles have quick detachable barrels), and a gas-operated locked bolt action is replaced with simple blowback (unlocked) bolt. Original firing system with hammer and pull-through selective trigger (short pull results in single shots, long pull - in full automatic fire) is retained, and a special magazine adapter is installed into the magazine housing. Depending on the basic version of the Steyr AUG assault rifle, which is used for conversion, 9mm version will retain its parent sighting equipment - 1.5X telescope sight in A1 version of Picatinny rail with optional open or optical sights in A2 and A3 versions.

Steyr TMP (Austria)

Steyr TMP (Austria)


Caliber: 9x19mm Luger/Parabellum
Weight: 1,3 kg empty
Length: 282 mm
Rate of fire: 800-900 rounds per minute
Magazine capacity: 15 or 30 rounds

Steyr TMP is a modern compact SMG. It is blowback operated, locked breech design, with rotating barrel. This mean that after the shot bolt with barrel locked to it are moving backward for some 4 millimeters. Then, the barrel rotates clockwise slightly, and thus unlocks the bolt. Rotaton controls via small cam on the barrel that follows the spiral groove inside the receiver.
Both upper and lower receiver are made from polymer. TMP has no stock and could be fired only from off-hand position.
Safeties featured automatic off-battery safety, drop safety and the manual safety switch.
TMP is reported as a very controllable and comfortable to fire firearm.

Steyr MPi 69 and MPi 81 submachine gun (Austria)

Steyr MPi 69 and MPi 81 submachine gun (Austria)


Steyr MPi 69 submachine gun


Steyr MPi 81 submachine gun; note added cocking handle that replaced sliding front sling swivel of MPi 69

Caliber: 9x19mm Luger/Para
Weight: 3.13 kg empty
Length (stock closed/open): 465 / 670 mm
Barrel length: 260 mm
Rate of fire: 550 rounds per minute
Magazine capacity: 25 or 32 rounds
Effective range: 100-150 meters

The Steyr MPi 69 submachine gun was developed by Austrian company Steyr-Daimler-Puch during early sixties and put into production; in around 1981 the basic design was slightly improved with addition of a conventional bolt cocking handle. The updated version was designated as MPi 81 and was manufactured until about mid-1990s. Both versions are in use by several police and military forces in Europe and elsewhere.

Steyr MPi 69 submachine gun is a blowback operated, selective fire weapon that fires from open bolt. The receiver is made from stamped steel, the receiver cover and pistol grip are made from nylon. The bolt is of "wrap-around" type (most of its weight is located in front of the breech face, around the barrel) and had a fixed firing pin. The cocking handle on MPi 69 is combined with front sling swivel; to cock the bolt, shooter has to pull the front part of the sling rearward and then release it. On MPi 81 submachine gun, this system is replace by conventional bolt cocking handle. Both MPi 69 and MPi 81 had cross-bolt button manual safety, located above the trigger. The fire mode selection mechanism is a combination of the trigger pull and safety button. If the safety button is pushed all the way to the left, the short pull on the trigger will produce single shots, and the long pull will produce burst firing. If the safety button will be left in mid-way position, only single shots will be possible. If the safety is all the way to the right, the gun is set to safe and will not fire.
Sights consist of protected front and flip-up type rear. The shoulder stock is retractable and made from steel wire.

--

Steyr - Solothurn S1-100 / MP-34 submachine gun (Switzerland / Austria)

Steyr - Solothurn S1-100 / MP-34 submachine gun (Switzerland / Austria)


Steyr MP-34 submachine gun, left side


Steyr MP-34 submachine gun, right side


Steyr MP-34 partially disassembled


Drawing from original patent, covering S1-100 integral magazine loading device

Caliber 9x19mm Luger / Parabellum, 9x23 Steyr, 9x25 Mauser Export
Weight 4,25 kg empty
Length 850 mm
Barrel length 200 mm
Rate of fire 400-500 rounds per minute
Magazine capacity 32 rounds
Effective range 150-200 meters

The story of this weapon start in around 1919, when German arms-making company Rheinmetall produced a prototype submachine gun designated MP.19. This weapon was developed by Lous Stange to same specifications as Schmeisser's MP.18/I, but MP.19 came too late to see any action during WW1. After the end of WW1, Germany was severely limited in design and production of small arms by treaty of Versailles. When Hitler came into power, German military-oriented companies began to move the R&D outside of Germany to avoid treaty limitations. In 1929, Rheinmetall purchased the small Swiss-based company Wafenfabrik Solothurn, which was used to finalize some Rheinmetall small arms which were developed under secrecy in Germany. One of those weapons was an improved version of MP.19 submachine gun, which was announced by Waffenfabrik Solothurn under company index "S1-100". This was an excellent weapon, reliable, controllable and accurate, but Solothurn company lacked production capabilities. To make guns on industrial scale, Solothurn teamed with famous Austrian gun-making company Waffenfabrik Steyr, and formed trade company Steyr-Solothurn Waffen AG in Zurich, Switzerland. This company sold weapons designed by Rheinmetall and Solothurn and made by Steyr, and S1-100 submachine gun was among first products of this international conglomerated. In the 1930 Austrian police adopts the S1-100 as Steyr MP.30, chambered for standard Austrian 9x23 Steyr pistol cartridge. It was also exported to Chile, Bolivia, Uruguay and El Salvador; it also was sold in limited numbers to China, in 7,63x25 Mauser caliber. Portugal adopted the S1-100 in 7,65x22 Luger caliber in 1938, and in 1942 purchased more S1-100's from Steyr but this time in 9x19 Luger. For South American markets, Steyr produced version of S1-100 in .45ACP caliber; this version was distinguished by additional pistol grip under the forearm. Austrian army adopted the S1-100 as Steyr MP.34, chambered for powerful 9x25 Mauser ammunition. When Hitler's Germany occupied Austria in 1938, it quickly consumed most of Austrian MP.30's and MP.34's, and after rebarreling to 9x19 ammunition these weapons were issued to German troops as MP.34(ö). Production of Steyr-Solothurn submachine guns has ceased in around 1940, when, under German administration, it was replaced in production at Steyr by much simpler and less expensive MP-40 submachine gun of German design. It must be noted that S1-100 was one of the finest submachine guns made prior to WW2, and probably one of most expensive.

Steyr-Solothurn S1-100 submachine gun was blowback operated, selective-fired weapon which fired from open bolt. Unlike most other submachine guns, the return spring was located in the buttstock and was linked to bolt via long push-rod, pivotally attached to the rear of the bolt. The basic action of the gun was accessible through the top cover, which was hinged at the front and opened up and forward to expose bolt and trigger unit below it. The fire mode selector was made in the form of a sliding switch, located at the left side of the stock. Early guns had Schmeisser-style bolt-locking safety in the form of hook-shaped cut which was used to engage the bolt handle when bolt was cocked. Later on, additional manual safety was added to the top cover, in front of the rear sight. this safety locked bolt either in cocked or closed position. The feed was from left side, with magazine housing slightly canted forward for more positive feeding Ejection was to the right. The magazine housing had an unusual magazine filler device, with slots for magazine at the bottom and for stripper clip - at the top. removed magazine was inserted into this device from the bottom, and then shooter placed stripper clips into the top of device and pushed cartridges down into magazine. Four standard 8-round clips were required to fill the magazine.
All S1-100 guns were fitted with wooden stock with semi-pistol grip. Barrel was enclosed into perforated jacket, which had provisions for mounting a bayonet. Sights included hooded front and tangent type rear, marked from 100 to 500 meters. One most unusual accessory, which was briefly advertised for S1-100 during mid-1930s, was a compact machine-gun type tripod, which was to provide additional stability for weapon when firing from ground. It seems that this tripod was never made in quantity.

F1 submachine gun (Australia)

F1 submachine gun (Australia)

Caliber: 9x19mm Luger/Para
Weight: 3.26 kg unloaded
Length: 715 mm
Barrel length: 203 mm
Rate of fire: 600 rounds per minute
Magazine capacity: 34 rounds
Effective range: 100-200 meters

The F1 submachine gun has been designed at the Australian Lithgow Small Arms Factory by 1962. Originally known as X-3 prototype, it appeared in 1962 as possible replacement for obsolete and aging Owen submachine guns. It was adopted as F1 by mid-sixties, and served well until late eighties, when it was officially replaced by the 5.56mm F88 assault rifle, a license-made version of Steyr AUG. F1 was simple, reliable and popular weapon.

F1 submachine gun is blowback operated, selective fired weapon which fires from open bolt. It uses tubular receiver with top-mounted magazine. Cocking handle is set at the left side of weapon, and does not reciprocate when gun is fired. Its slot is covered by sliding dust cover. Weapon is made in so-called in-line layout, and the front of the buttstock slides over the rear of the receiver, and is fixed there by special catch. For disassembly, gun is unloaded, then catch is pressed and buttstock pulled off the receiver toward the rear; then, bolt and return spring are removed. Sights are of fixed type, and due to top-mounted magazine are offset to the left. Rear sight is made folding for more comfortable carry. Unlike many other submachine guns, F1 can be fitted with standard rifle bayonet, which is attached to the right of the perforated barrel jacket.